|
The Gold Mate Range require around 16V DC to operate correctly. This
can normally be achieved by using a NON regulated 12V wall plug
adapter. These give out around 17V DC at the very low current the
Gold Mate programmers use.
However a lot of people use their programmer on the
move and have expressed a lot of interest in using it with
batteries. So here is a picture showing you how to connect 2 PP3
batteries in Series to give you 18V DC.
Please remember that you
must use good batteries and programmer performance could suffer when
the batteries become low. Never leave the batteries connected when
the programmer is not in use.
You can use 2 PP3 flying leads by connecting a
black and red from each lead to each other then taking the other red
and black to the 2.5mm Jack Plug.
These leads are also available for sale. Check the
pricing page for pricing.
| 
